This very practical product has several unique features such as dual cavity suction cups, a non-abrasive neoprene fender liner, an A.B.S. base plate, space age shock absorbing foam, crack resistant vinyl, and U.V. barrier coated leather.

 The base plate has been designed so that all the suction cups can be replaced if necessary by simply inserting the cap of the suction cup into the base plate key hole and twisting one complete rotation. The  Fender Guard is available in two versions. Both measure approx. 6 inches wide, and are designed to fit all Harley Davidson Motorcycles and most metric cruisers with stock factory rear fenders. The basic version is designed to be used in conjunction with the Biker’s Friend Saddle Bag while the deluxe version can also be used as a passenger seat.

 Please read the following application data before attempting to use your this product.

1. Upon removing the Fender Guard from the bag, inspect every suction cup to insure cleanliness.

2. Inspect the neoprene pad liner and make sure it is void of debris.

3. Make sure that your fender surface is dry and clean.

4. To secure to fender, place the Fender Guard on to the desired location, take your thumb and apply strong pressure in a downward motion above all suction cups.

5. To remove from fender, take finger and lift each suction cup tab, gently pry off suction cups.

6. Make sure and check that all suction cups are mounted securely before allowing a passenger to ride on the Fender Guard. (Only the Phantom Pad Low Profile seat is recommended for passengers)

7. To clean suction cups, apply a small amount of household rubbing alcohol to a soft, clean cloth and gently remove any residue acquired from fender wax. Make sure all suction cups are dry before using your Fender Guard.

8. While using your Fender Guard, be sure to ride safely, defensively, and within the limits of the law and your abilities.

Designed to protect the rear fender when using the Biker's Friend Saddle Bag. (not intended to be used as a passenger seat) Measuring 10" long, 1/8" thick, 6" wide, covered in black leather with 6 dual cavity suction cups and neoprene liner. Sold exclusively at Biker's Friend.

Designed to protect the fender when using the Biker's Friend Saddle Bag, (or it CAN be used as a passenger seat.) Measuring 10" long, 3/4" thick, 6" wide, covered in black leather with 6 dual cavity suction cups and neoprene liner.